close
close
Broach Tool Wobble Type, PS10047 (MA2110-EN2602) Port Serrations

NOTES: Unless Otherwise Specified
  • Replacement or spare Cutter and Screw Combinations may be purchased individually.
  • After broaching, a maximum runout of 0.23 is permissible between the serration major diameter and the controlled minor diameter of the port thread.
APPLICATION: This broach tool is designed to produce serrations in the counterbore of PS10047 ports. The tool will broach into aluminum, magnesium and materials with a maximum hardness of 40 HRC.

METHOD: Wobbling Drift Holder is ordered separately using part number W37601.00
1 - 13 of 13 | Results Per Page | View | Unit of Measure
1 

Item #

Port Dash No.
PS10047
MA2110
EN2602

A

B Number of Teeth

Cutter and Screw
Combination Number

N/A -077 N/A 13.130 mm N/A 23 N/A RFMOPB077WBA23
N/A -098 N/A 15.010 mm N/A 27 N/A RFMOPB098WBA23
N/A -125 N/A 18.080 mm N/A 31 N/A RFMOPB125WBA23
N/A -136 N/A 19.760 mm N/A 40 N/A RFMOPB136WBA23
N/A -153 N/A 21.260 mm N/A 38 N/A RFMOPB153WBA23
N/A -170 N/A 22.860 mm N/A 40 N/A RFMOPB170WBA23
N/A -192 N/A 26.800 mm N/A 38 N/A RFMOPB192WBA23
N/A -214 N/A 28.300 mm N/A 43 N/A RFMOPB214WBA23
N/A -231 N/A 30.450 mm N/A 46 N/A RFMOPB231WBA23
N/A -253 N/A 33.990 mm N/A 36 N/A RFMOPB253WBA23
N/A -295 N/A 37.310 mm N/A 47 N/A RFMOPB295WBA23
N/A -320 N/A 41.220 mm N/A 32 N/A RFMOPB320WBA23
N/A -350 N/A 43.310 mm N/A 53 N/A RFMOPB350WBA23
1 - 13 of 13 | Results Per Page | View | Unit of Measure
1