1 - 25 of 29 | Results Per Page | View | Unit of Measure
1 2 

Item #

Nominal Diameter No.

Tensile

Installed Spindle Retention

Hole Limits

Design Grip Range Min.

Design Grip Range Max.

N/A 4 N/A 250 lb N/A 125 N/A 0.129-0.132 in N/A 0.045 in N/A 0.125 in
N/A 4 N/A 250 lb N/A 125 N/A 0.129-0.132 in N/A 0.126 in N/A 0.187 in
N/A 4 N/A 250 lb N/A 125 N/A 0.129-0.132 in N/A 0.188 in N/A 0.250 in
N/A 4 N/A 250 lb N/A 125 N/A 0.129-0.132 in N/A 0.251 in N/A 0.312 in
N/A 4 N/A 250 lb N/A 125 N/A 0.129-0.132 in N/A 0.313 in N/A 0.375 in
N/A 4 N/A 250 lb N/A 125 N/A 0.129-0.132 in N/A 0.376 in N/A 0.437 in
N/A 4 N/A 250 lb N/A 125 N/A 0.129-0.132 in N/A 0.438 in N/A 0.500 in
N/A 4 N/A 250 lb N/A 125 N/A 0.129-0.132 in N/A 0.501 in N/A 0.562 in
N/A 5 N/A 390 lb N/A 200 N/A 0.160-0.164 in N/A 0.063 in N/A 0.125 in
N/A 5 N/A 390 lb N/A 200 N/A 0.160-0.164 in N/A 0.126 in N/A 0.187 in
N/A 5 N/A 390 lb N/A 200 N/A 0.160-0.164 in N/A 0.188 in N/A 0.250 in
N/A 5 N/A 390 lb N/A 200 N/A 0.160-0.164 in N/A 0.251 in N/A 0.312 in
N/A 5 N/A 390 lb N/A 200 N/A 0.160-0.164 in N/A 0.313 in N/A 0.375 in
N/A 5 N/A 390 lb N/A 200 N/A 0.160-0.164 in N/A 0.376 in N/A 0.437 in
N/A 5 N/A 390 lb N/A 200 N/A 0.160-0.164 in N/A 0.438 in N/A 0.500 in
N/A 5 N/A 390 lb N/A 200 N/A 0.160-0.164 in N/A 0.501 in N/A 0.562 in
N/A 5 N/A 390 lb N/A 200 N/A 0.160-0.164 in N/A 0.563 in N/A 0.625 in
N/A 5 N/A 390 lb N/A 200 N/A 0.160-0.164 in N/A 0.626 in N/A 0.687 in
N/A 6 N/A 560 lb N/A 290 N/A 0.192-0.196 in N/A 0.080 in N/A 0.125 in
N/A 6 N/A 560 lb N/A 290 N/A 0.192-0.196 in N/A 0.126 in N/A 0.187 in
N/A 6 N/A 560 lb N/A 290 N/A 0.192-0.196 in N/A 0.188 in N/A 0.250 in
N/A 6 N/A 560 lb N/A 290 N/A 0.192-0.196 in N/A 0.251 in N/A 0.312 in
N/A 6 N/A 560 lb N/A 290 N/A 0.192-0.196 in N/A 0.313 in N/A 0.375 in
N/A 6 N/A 560 lb N/A 290 N/A 0.192-0.196 in N/A 0.376 in N/A 0.437 in
N/A 6 N/A 560 lb N/A 290 N/A 0.192-0.196 in N/A 0.438 in N/A 0.500 in
1 - 25 of 29 | Results Per Page | View | Unit of Measure
1 2