Broach Tool Wobble Broach Machining, PS10035 Port Serrations

NOTES: Unless Otherwise Specified
  • Wobbling Drift Hold is ordered separately using part number W37601.00
  • CAUTION: Care must be taken when machining to provide the following requirements: A maximum runout of .009 must be maintained between serration major dia and controlled minor dia (specified in Rosan PS10035 port specification) after broaching.
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1 

Item #

B Number of Teeth

A ± .002

To Produce
Serrations for
Port Number

N/A 24 N/A 0.412 Inch N/A PS10035-02
N/A 26 N/A 0.481 Inch N/A PS10035-03
N/A 30 N/A 0.527 Inch N/A PS10035-04
N/A 36 N/A 0.638 Inch N/A PS10035-05
N/A 36 N/A 0.713 Inch N/A PS10035-06
N/A 40 N/A 0.824 Inch N/A PS10035-08
N/A 38 N/A 1.055 Inch N/A PS10035-10
N/A 40 N/A 1.185 Inch N/A PS10035-12
N/A 50 N/A 1.357 Inch N/A PS10035-14
N/A 36 N/A 1.474 Inch N/A PS10035-16
N/A 56 N/A 1.798 Inch N/A PS10035-20
1 - 11 of 11 | Results Per Page | View | Unit of Measure
1