close
close
MATERIAL:
  • Bracket: 1050 Carbon Steel per AMS 5085. heat treat to HRc 42-47
  • Housing: 300 Series Cres per AMS 5514
  • Nut: 1050 Carbon Steel per AMS 5085, heat treat to 160 Ksi min ultimate tensile strength
  • Sleeve: Cres per AMS 5639 (304) or AMS 5514 (305)
  • Seal: Buna-N per MIL-R-6855, Class 1 & 2, Grade 60
FINISH CODE:
  • Bracket, Sleeve & Nut: Cad plate per AMS QQ-P-416, Type II, Class 2
  • Housing: Passivate per AMS-QQ-P-35
  • Nut: Dri-Film Lube per MIL-PRF-46010
  • Seal: none
Unit of Measure

Nut Type

N/A Locking
Thread Size1 N/A 0.1120-40 UNJC-3B
Lead2 N/A Double

H Max.

N/A 0.405 Inch
L3 N/A 0.127 Inch
Ø M Max.4 N/A 0.217 Inch

Ø Q +.004/-.001 - Soft

N/A 0.218 Inch

Ø Q +.004/-.001 - Hard

N/A 0.218 Inch

Ø R1 +.020/-.000

N/A 0.312 Inch

Ø R2 ±.010

N/A 0.307 Inch

Ø U

N/A 0.192 Inch

Ø W

N/A 0.592 Inch

Y ±.025

N/A 0.241 Inch

Ø Z

N/A 0.228 Inch

G1

N/A 0.313 - 0.343 Inch

G2

N/A 0.352 - 0.382 Inch
K5 N/A 0.378 Inch

Thread Type

N/A Unified

N/A A minimum of two threads are deformed to produce self-locking action per NASM25027 when locking feature is desired.

N/A

  • Nut element has .060 total radial float for grip lengths "AA" thru "C"; .046 min for grips greater than "C"
  • For high volume installation rates, alternative power tooling is available: contact factory for additional information.

    • 1 Sealing performance meets or exceeds NAS 1473 STD. For test information see Report C-10724
      Class -3B "J" threads per SAE-AS-8879.
    • 2 Nut element color code: (PCD 160147)
            None-Locking standard threads
            Green – Non-Locking standard threads
            Yellow - Coarse threads
            Orange - Fast lead threads
    • 3 Soft- dimension for Soft Aluminum Alloys & Plastics
    • 4 Hard - dimension for Hard Aluminum Alloys & Steel
    • 5 "K" is measured from the bottom of the rolled-over housing.