close
close
Please click here to view the Installation and Removal

Unit of Measure

Insert Type

N/A Standard

Series

N/A RDJ3600

Material Type

N/A 4340 Steel (Alternate 4140 Steel)

Material Specification

N/A MIL-S-5000 (AMS-S-5625)

Heat Treat

N/A 160-180 KSI UTS Min

Finish

N/A Cadmium Plate per AMS-QQ-P-416, Type II, Class 3

Internal Thread Lock

N/A No

A - Internal Thread, Class 3B

N/A 0.1900-32 UNJF

B - External Thread

N/A 0.3750-16

B - External Thread - Pitch Diameter

N/A 0.3347-0.3372 in

B - External Thread - Minor Diameter

N/A 0.2906-0.3011 in

C - Dia ±.005

N/A 0.196 in

D ±.005

N/A 0.075 in

E ±.015

N/A 0.210 in

F ±.015

N/A 0.310 in

G - Dia ±.005

N/A 0.286 in
Step Drill1 N/A RCDC24-312
Basic Tap Size2 N/A 0.3750-16 UNC

Wrench Part Number

N/A R1105W

Lockring Drive Tool Part Number

N/A R3605D
Removal Drill Size3 N/A F

N/A

  • The external thread has a special pitch diameter and minor diameter which installs into an AS8879 Class 3B, FED-STD-H28/2 Class 3B, or National Class 3 tapped hole.
  • <5> Internal thread locking feature complies with applicable portion of specification NASM25027 for 450°F.
  • "B" diameter and minor diameter of thread to be concentric within .003 FIM.
  • RD3600 Series inserts are designed for maximum loads in tension within the minimum envelope dimensions. The design data table lists test pull-out strenghts developed by the inserts when installed in 356-T6 and 2024-T4 aluminum alloys with ultimate shear strengths of 25,000 and 37,000 psi respectively. The calculated ultimate strengths of bolt heat-treated to 145,000 psi and 180,000 psi are listed for reference and are based on tensile stress areas listed in FED-STD-H28.
  • Unless otherwise specified dimensions are in inches & ASME Y14.5M.

  • 1 Step drills are designed for thru hole drilling. When used to drill a blind hole, it may be necessary to grind the drill to suit the depth required.
  • 2 Taps are not supplied by Howmet.
  • 3 Removal drills are not supplied by Howmet.