close
close
Broach Tool - Copper Tungsten Electrical Discharge Machining, PS10035 Port Serrations

NOTES: Unless Otherwise Specified
  • MATERIAL: COPPER TUNGSTEN, with option of alloy steel shank.
  • When using this tool, the machine should be set to produce a burn which is .002 to .003 larger on the diameter than “A” Dia. This will allow the lockring to fit into the serration produced with about .004 to .005 clearance. The applicable lockring may be used to gage the port serration.
CAUTION: Care must be taken when machining to provide the following requirements: A maximum runout of .009 must be maintained between serration major dia and controlled minor dia (specified in Rosan PS10035 port specification) after machining.
Unit of Measure

A (+.002/-.004)

N/A 0.712 Inch

Number of Teeth

N/A 36

B ± .002

N/A 0.500 Inch

C ± .010

N/A 0.156 Inch

To Produce
Serrations for
Port Number

N/A PS10035-06