close
close
MATERIAL: Clip - 1050 Steel per AMS5085
Nut - 1050 Steel per AMS5085 or 4037 per AMS6300
HEAT TREAT: Clip - Hardened per MIL-H-6875 Except AUSTEMPERED, 48-51 HRC
NUT - To Meet Performance Requirements of NASM 25027, 46 MAX. HRC.
FINISH: Clip - Cadmium Plate, QQ-P-416, Type II, Class 1
Nut - Cadmium Plate, QQ-P-416, Type II, Class 2.
LUBRICATION: Nut - Solid Film Lubricant per MIL-L-46010, Type I Meeting the Requirements of NASM 25027
THREADS: MIL-S-8879 (Prior to Addition of Dry Film Lubricant)
PERFORMANCE: Nut Element Conforms to NASM 25027

Tolerance unless otherwise specified .XX ±.03, .XXX ±.010, Angles ±1/2°
Unit of Measure

Edge Distance

N/A 0.625 in

Panel Thickness Range

N/A 0.020-0.160 in

Thread Type

N/A Unified

Thread Size MIL-S-8879

N/A 0.1640-32 UNJC-3B

Simplified Material

N/A Carbon Steel

A Max

N/A 0.675 in

A Min

N/A 0.655 in

B - Min Diameter

N/A 0.192 in

C - Min Diameter

N/A 0.168 in

D - Max Diameter

N/A 0.191 in
Recommended Installation Hole Diameter1 N/A 0.192-0.202 in

Weight per 100

N/A 0.510 lb

Clip Material

N/A 1050 Steel per AMS5085

Nut Material

N/A 1050 Steel per AMS5085 or 4037 per AMS6300

Clip Heat Treat

N/A Hardened per MIL-H-6875 Except AUSTEMPERED, 48-51 HRc

Nut Heat Treat

N/A To Meet Performance Requirements of MIL-N-25027, 46 Max HRc

Clip Finish

N/A Cadmium Plate per QQ-P-416, Type II, Class 1

Nut Finish

N/A Cadmium Plate per QQ-P-416, Type II, Class 2

Nut Lubrication

N/A Solid Film Lubricant per MIL-L-46010, Type I Meeting the Requirements of MIL-N-25027

Performance

N/A Nut Element Conforms to MIL-N-25027
  • 1 When installed in the recommended installation hole. The clip will float approx. .011 additional radial float can be obtained by using larger hole sizes. These parts are designed for a maximum installation hole diameter .032 over the maximum recommended value.