close
close
Unit of Measure

Series

N/A SF(T)5902

Material

N/A A286 CRES per AMS 5731, AMS 5732, AMS 5734, or AMS 5737

Heat Treat

N/A 277 HRC ( 140 KSI min)

Finish

N/A Clean and descale per ASTM A380 or Passivate per ASTM A380 or AMS2700

Military Part Number

N/A MS51992C802-20

Lockring - Low Strength Magnesium

N/A RL1997-102

Lockring - Aluminum

N/A RLRR1997-102

Lockring Part Number

N/A RLRR1997E102

Lockring Military Part Number

N/A MS51997E102P

Nut End Type

N/A Undrilled

A Nut End Thread Size

N/A 0.1900-32 UNJF-3A

Stud End type

N/A No Recess

B Stud End Thread Size

N/A 0.3125-18

B Stud End Thread-Pitch Diameter

N/A 0.2795-0.2778 in

B Stud End Thread-Minor Diameter

N/A 0.2474-0.2373 in

C ±.020

N/A 0.511 in

D - Dia

N/A 0.189-0.186 in

E - Dia +.005 -.004

N/A 0.203 in

F - Dia +.007 -.002

N/A 0.230 in

G - Dia +.000 -.015

N/A 0.237 in

H - Dia Min

N/A 0.175 in

J

N/A 13.000

K +2 -1

N/A 102.000 º

T ±.015

N/A 0.469 in

V ±.016

N/A 0.128 Inch

P - Dia ±.010

N/A 0.137 in

L ±.015

N/A 1.250 in

Grip Length

N/A 0.781 in

Shank Length

N/A 0.095 in

Notes

N/A
  • Surface Roughness: ANSIB 46.1 except serrated collar. Machined surfaces to be 125 microinch Ra per
  • Threads: The stud end thread has a special pitch diameter and minor diameter which installs into A AS8879, class 3B tapped hole.
  • Concentricity: Shank of nut end shall be concentric with serrated collar within 0.006 FIR.
  • Fillets: R .030 Maximum
  • Edges: Edges broken .003-.015 umless otherwise specified
  • "T"dimension will terminate within3 pitches of serrated collar.